赖氨酸修饰壳聚糖磁性超微载体的制备和表征

本文设计并合成了良好水溶性的赖氨酸修饰壳聚糖,并对制备工艺进行了优化.产物通过红外(FTIR)和核磁(1H-NMR)进行了表征,并将其作为壳层材料制备了赖氨酸修饰壳聚糖磁性超微载体.通过光电能谱(XPS)、透射(TEM)、激光粒度仪、X射线衍射(XRD)、磁性能测试(VSM)对载体进行了表征.结果表明,制备的赖氨酸修饰壳聚糖磁性超微载体表面带有大量的氨基(-NH2),粒径分布较为均一(100nm左右),形貌较为规则,并具有良好的超顺磁性,因而该载体具有更加良好的性能.     

氧氟沙星片剂和滴眼液中氧氟沙星对映体的毛细管电泳拆分及定量分析

采用环糊精及其衍生物为手性选择剂在CE上对氧氟沙星对映体进行了分离，研究了环糊精种类、浓度、分离电压、温度对分离的影响．重点考察了氧氟沙星的定量线性范围、检测限和重现性，在20-200mg／L浓度范围内，迁移时间重现性的相对标准偏差(RSD)控制在1．13％以内，峰面积重现性的RSD控制在4．3％以内，检测限为1mg／L．结果表明用20mmo1／L二甲基-β-环糊精(DM-β-CD)为手性选择剂，背景电解质为50mmo1／L Na2HPO4，pH＝3．0，不加有机添加剂情况下可得到较好的分离效果．同时，对氧氟沙星药品实样进行了分析，建主了一种市售氧氟沙星片剂和滴眼液中氧氟沙星对映体简单、快速的毛细管电泳分离、定量分析方法．     

n型T'-214相超导体的结构和性质

T＇－214相化合物R2-xCexCuO4（R为稀土离子）成为超导体决定于R3+的离子半径大小、Ce4+的取代量和化合物的热处理时的稳定性．从Raman光谱实验结果提出热处理过程中发生电荷转移．Ce4+的取代引起TN（Cu）下降，当TN（Cu）降到0时，超导性出现。不同的稀土离子TN（Cu）不同，稀土离子的反铁磁性（AFM）与超导性（SC）共存。热电势的测量结果可以用双通道模型解释，n型超导体中电子与空穴共存．     

Ternary rare-earth alumo-silicides—single-crystal growth from Al flux, structural and physical properties

A number of rare-earth alumo-silicides (R-Al-Si) have been synthesized from the corresponding elements by high-temperature reactions, carried out in excess of aluminum to serve as a flux. Under these experimental conditions, large single crystals of all R-Al-Si ternary phases were readily produced. The crystal structures these ternaries adopt were studied by means of powder and single-crystal X-ray diffraction and were classified as follows: (1) the early rare-earths (R=La, Ce, Pr, Nd, Sm, Gd) yield RAl_xSi_2−x, x∼1, non-stoichiometric ternary derivatives of the body-centered α-ThSi₂-type; (2) the late rare-earths (R=Tb, Dy, Ho, Er, Tm) form stoichiometric R₂Al₃Si₂ compounds that crystallize in the C-centered monoclinic Y₂Al₃Si₂-type; (3) the divalent Eu and Yb produce EuAl₂Si₂ and YbAl₂Si₂ with the trigonal CaAl₂Si₂-type, whereas the last lanthanide element, Lu, forms LuAlSi with C-centered orthorhombic YAlGe-type. These structural trends are reviewed, and the evolution of the basic physical properties such as magnetism, heat capacity and electrical resistivity when moving across the series is described in detail.     

Synthesis and structural, spectroscopic and magnetic studies of two new polymorphs of Mn(SeO3)·H2O

Two new manganese(II) selenite polymorphs with formula Mn(SeO₃)·H₂O have been synthesized by slow evaporation from an aqueous solution. The crystal structure of both compounds (1) and (2) have been solved from X-ray diffraction data. The structure of (1) was determined from single-crystal X-ray diffraction techniques. The compound crystallizes in the Ama2 space group, with a=5.817(1), b=13.449(3), and Z=4. The structure of (2) has been solved from X-ray powder diffraction data. This phase crystallizes in the P2₁/n space group with unit-cell parameters of a=4.921(3), b=13.121(7), , β=90.03(2)° and Z=4. Both polymorphs exhibit a layered structure formed by isolated sheets of MnO₆ octahedra and (SeO₃)²⁻ trigonal pyramids in the (010) plane. These layers, which contain one manganese and selenium atom crystallographically independent, are formed by octahedra linked between them through the selenite oxoanions. The difference of both compounds consists in the stacking of the layers along the b-axis. The IR spectra show the characteristic bands of the selenite anion. Studies of luminescence performed at 6 K and diffuse reflectance spectroscopy have been carried out for both phases. The Dq and Racah (B and C) parameters, from luminescence and diffuse reflectance spectroscopy, are Dq=705, B=750, for (1) and Dq=720, B=745, for (2). The ESR spectra of both compounds are isotropic with g-values of 1.99(1). Magnetic measurements indicate the presence of antiferromagnetic couplings in both phases. The J-exchange parameters have been estimated by fitting the experimental magnetic data to a model for square-planar lattice. The values obtained are J/k=-0.83, −0.91 K and J^′/k=-0.97, −1.20 K, for polymorphs (1) and (2), respectively.     

Magnetic interactions in a series of paramagnetic Ln(III) complexes with a chelated imino nitroxide radical

The magnetic interactions in a new series of isostructural imino nitroxide radical lanthanide(III) complexes, [Ln(hfac)₃(IM2py)] (Ln = Gd–Yb: IM2py = 2-(2′-pyridyl)-4,5-dihydro-4,4,5,5-tetramethyl-1H-imidazoline-1-oxy; hfac = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione), are examined by considering the intrinsic paramagnetic contribution of the Ln(III) ion from the corresponding [Ln(hfac)₃(pybzim)] with a diamagnetic pybzim(2-(2-pyridyl)benzimidazole) ligand; the Ln(III)–IM2py interaction being antiferromagnetic for the 4f⁷ to 4f¹³ Ln(III) complexes and negligibly small for the other complexes. This series is the first example reverse to the previous cases for the series of Ln–Cu or Ln–aminoxyl(NIT) radical (4,5-dihydro-4,4,5,5-tetramethyl-1H-imidazoline-3-oxide-1-oxy) complexes, other than only a few examples of semiquinone Ln complexes. This reverse nature of the magnetic interaction, as compared with the NIT complexes, validates the empirical approach by O. Kahn et al. [Inorg. Chem. 38 (1999) 3692; J. Am. Chem. Soc. 122 (2000) 3413] in the spin-coupled systems for a series of Ln(III) complexes.     

DNA-mediated coordinative assembly of upconversion hetero-nanostructures for targeted dual-modality imaging of cancer cells

We reported a simple and universal strategy for DNA-mediated assembly of CdTe quantum dots (QDs) and lanthanide-doped upconversion nanoparticles (UCNPs). Such DNA-QD/UCNPs heterostructures not only maintains both fluorescent properties of QDs and upconversion luminescence behaviors of UCNPs, but also offers a polyvalent DNA surface, allowing for targeted dual-modality imaging of cancer cells using an aptamer     

Dielectric,magnetic and mechanical properties of ferrite composites

The dielectric and magnetic properties of carbonyl—iron (CI) and nickel zinc ferrite polymer composites were studied with respect to the ferrite particulate content and microwave frequency. From the experimental data and using empirical models that relate the composite dielectric and magnetic properties, the respective dielectric and magnetic properties of the neat fillers were estimated. The tensile properties of the particulate composites comprising CI were shown to follow qualitatively Mooney's equation for the elastic modulus. The tensile strength of an elastomeric polyurethane and PVC composites containing CI increased with particulate content, while the elongation to break decreased with filler content. SEM micrographs of tensile fracture surfaces indicated that somewhat better adhesion is obtained in the case of the polyurethane-based composites compared to the PVC ones.     

Pectin in controlled drug delivery – a review

Controlled drug delivery remains a research focus for public health to enhance patient compliance, drug efficiency and reduce the side effects of drugs. Pectin, an edible plant polysaccharide, has been shown to be useful for the construction of drug delivery systems for specific drug delivery. Several pectin derived formulations have been developed in our laboratory and tested in vitro, ex vivo, and in vivo for the ability to deliver bioactive substances for therapeutic purposes in the context of interactions with living tissues. Pectin derivatives carrying primary amine groups were more mucoadhesive and have shown potential in nasal drug delivery and other mucosal drug delivery. Pectin derivatives with highly esterified galacturonic acid residues are more hydrophobic and able to sustain the release of incorporated fragrances for a prolonged duration. Less esterified pectin derivatives are able to penetrate deeper into the skin and may be useful in aromatherapy formulations. Pectin, in combination with zein, a corn protein, forms hydrogel beads. The bound zein restricts bead swelling and retains the porosity of the beads; the pectin networks shield the zein from protease attack. The complex beads are ideal vehicles for colon-specific drug delivery. Studies presented in this paper indicate the flexibility and possibility to tailor pectin macromolecules into a variety of drug delivery systems to meet different clinical requirements. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the US Department of Agriculture.     

Dendrimers as potential drug carriers; encapsulation of acidic hydrophobes within water soluble PAMAM derivatives

This paper describes the synthesis of three neutral water soluble poly(amidoamine) (PAMAM) dendrimer derivatives. The ability of the two larger dendrimers to bind small acidic hydrophobic molecules is reported. Spectroscopic data and pH behaviour suggested that the acidic hydrophobes were forming stable ion pairs with the dendrimer's internal, basic tertiary nitrogens. With respect to forming 1:1 and 2:1 substrate/dendrimer complexes, both of the larger dendrimers were equally efficient at binding. All dendrimer/substrate complexes were completely miscible with water in all proportions (i.e. infinitely water soluble). When the bound substrates are drug moieties, then the resulting complexes could be considered as potential drug delivery systems. Flow calorimetry demonstrated that the dendrimers were able to release their hydrophobic guests when in contact with a biological cell.